#FOCUSWRITER RASPBERRY PI SOFTWARE#
There are some more hardware details and instructions to use Ansible open-source software platform for remote configuring and managing computers on Github. Good luck with that! The OS is bootable from either the eMMC, SD Card, or the network. The DeskPi Super6C ships with a 100W power supply, but you’ll need to source your own Raspberry Pi CM4 module. Dimensions – 170 x 170 x 21 mm (Mini-ITX form factor).Power Supply – 19V to 24V DC via a power barrel jack or 12V via a 4-pin ATX connector.2x USB 2.0 Type-A ports, 2x USB 2.0 interfaces via header, all attached to the first CM4 module.6x micro USB ports, one per CM4 module to flash the OS to the eMMC flash (except for Raspberry Pi CM4 Lite modules).
Gigabit Ethernet switch to interconnect all 6x system-on-modules.Video Output – 1x HDMI 2.0 output, 1x HDMI 1.4a output, both attached to the first Raspberry Pi CM4 module.6x MicroSD card slots, one per CM4 module.6x M.2 PCIe Gen2 x1 2280 sockets, one per CM4 module.SoM – 6x sockets for up Raspberry Pi Compute Module 4.The board also features two Gigabit Ethernet ports and two HDMI outputs, as well as four USB 2.0 ports. The Super6C offers a much slimmer design since the modules are inserted horizontally instead of vertically, plus each module comes with its own M.2 NVMe SSD socket besides a microSD card slot. It now has some competition with the DeskPi Super6C board, still based on the mini-ITX form factor, and taking up to six Raspberry Pi CM4 modules.
You may remember the Turing Pi 2 mini-ITX cluster board that supports up to four Raspberry Pi CM4 modules.
0 kommentar(er)
